10 ton electrical actuators, 20 ton electric machine screw actuator for penstock gate valves at sewage treatment plant in pakistan

10 ton electrical actuators, 20 ton electric machine screw actuator for penstock gate valves at sewage treatment plant in pakistan.

8 ton loads input torque required T = [ (W x L1) / (2 x 3.14 x i x η) ] + T0
W: max. dynamic load / equivalent load per jack (n)
L1: jack screw pitch (m), i: ratio, η: jack overall efficiency, T0: no-load torque (n) 
T = [(80000x0.01) / (6.28x40x0.13)] + 3.9
T = 28.4 nm

8 ton loads power required P1 = T x n1 / 9550
T: Input torque (nm), n1: input revolutions (rpm)
P1 = 28.4 x 145 / 9550
P1 = 0.45 kw

Supplying jt-20t jack & motor flange, without lifting screw, and low worm gear ratio 1/40, 0.25mm per turn of revolution, jt-20t jack max. dynamic load 8.4 ton, max. static load 20t. Model: JT-20T-L-M4. Matching 1/10 reduction ratio gear motor, output 145rpm. Gear motor power required must > 0.45 Kw, torque required > 28.4 nm, so selecting the closed gear motor power is 0.75kw. Special requirements: 400V AC, 50HZ, 3PHASE, IP55, Model: TCV28-750-10-S1, 0.75Kw, 28mm output shaft diam., 1/10 reduce ratio, output 145rpm. Lifting speed about 145x0.25 = 36.25mm/min. 

Hand Human Force, Matching 400MM Diam. Hand Wheel. When hand turning operation, please remove/disassembly 0.75kw gear motor.
W1 = T / R 
T: worm torque (N.m), R: radius of hand wheel (m)
W1 = 28.4 / 0.2
W1 = 142 N = 14.2 kg hand turning force.

4 ton loads input torque required T = [ (W x L1) / (2 x 3.14 x i x η) ] + T0
W: max. dynamic load / equivalent load per jack (n)
L1: jack screw pitch (m), i: ratio, η: jack overall efficiency, T0: no-load torque (n) 
T = [(40000x0.008) / (6.28x32x0.15)] + 2
T = 12.62 nm

4 ton loads power required P1 = T x n1 / 9550
T: Input torque (nm), n1: input revolutions (rpm)
P1 = 12.62 x 145 / 9550
P1 = 0.2 kw

Supplyingjt-10t jack & motor flange, without lifting screw, and low worm gear ratio 1/32, 0.25mm per turn of revolution, jt-10t jack max. dynamic load 6.4 ton, max. static load 10t. Model: JT-10T-L-M4. Matching 1/10 reduction ratio gear motor, output 145rpm. Gear motor power required must > 0.2 Kw, torque required > 12.62 nm, so selecting the closed gear motor power is 0.4kw. Special requirements: 400V AC, 50HZ, 3PHASE, IP55, Model: TCV22-400-10-S1, 0.4Kw, 22mm output shaft diam., 1/10 reduce ratio, output 145rpm, Lifting speed about 145x0.25 = 36.25mm/min.

Hand Human Force, Matching 200MM Diam. Hand Wheel. When hand turning operation, please remove/disassembly 0.75kw gear motor.
W1 = T / R 
T: worm torque (N.m), R: radius of hand wheel (m)
W1 = 12.62 / 0.1
W1 = 126 N = 12.6 kg hand turning force.









Geared Motor rating isrequired at 45 deg. C Ambient Temp. Relative Humidity <90%, using high temperature bearings and high temperature stator coils.

YOUTUBE VIDEO: http://youtu.be/X5XoEiPorPc 
________________________________
Jacton Electromechanical Co.,Ltd
Chang An,Dongguan,Guangdong,China
Phone: 86 769 81585852
Fax: 86 769 81620195
Mobile: 86 135 32830851
Skype: jactonjack
Email: sales@screw-jack.com
Web: http://www.screw-jack.com 
________________________________
Our Advantages:
1. Only for lifting solutions, only for jacks, gear boxes, complete lifting system with all accessories.
2. International standard materials like bronze worm gear / traveling nut, bronze traveling nut / acme nut, heating treatment worm shaft s45c, acme screw s45c.
3. Pay more attention axial play & radial play, ensure jacks long service life.
4. Standard 1 year warranty, any defects from our sides, after us confirmed, free for replacements.

Comments

Popular posts from this blog

20 ton silo acme nut screw jack, 20t silo traveling nut screw jack, 20ton silo lifting nut machine screw jack for silo bolted storage tanks lifting in australia

Hand Operated Upright Rotating Machine Screw Actuator 5Ton And 2963MM Long Acme Screw And Acme Nut For Conveying Rails In Rail Train In South Africa